- #Vcds program how to#
- #Vcds program drivers#
- #Vcds program portable#
- #Vcds program software#
- #Vcds program Bluetooth#
Scroll down the installation list and make sure the check box is ticked for “77‐Telephone” This is the first screen of the VCDS program.
Correct connection will be verified when the LED on the cable head lights GREEN.Ĭonnect the USB end of the cable to the computer and start the VCDS program.
#Vcds program drivers#
Do not turn accessories on/off during coding.Ĭonnect the HEX+CAN‐USB Interface cable to the vehicles OBDII diagnostic port, this is usually located underneath the dash on the drivers side of the vehicle. If the car is not connected to a suitable power supply, start the engine and leave running with no vehicle accessories (A/C, radio etc) running.
#Vcds program Bluetooth#
The vehicle must have a good and constant power supply while the car is being coded for the Bluetooth Gateway.ĭAMAGE MAY OCCUR TO THE VEHICLE IF EITHER THE VEHICLES BATTERY OR THE COMPUTERS POWER SUPPLY ARE INTERRUPTED DURING CODING. Make sure that the vehicle is either connected to a suitable power supply or that the engine is running.
#Vcds program portable#
If you are using a laptop or portable computer please ensure that there is sufficient battery life or that it is connected to its power supply.
#Vcds program software#
Make sure the computer you are using has the VCDS software installed correctly and that the USB interface cable software drivers are also installed correctly. The use of the VCDS Software for other purposes is highly discouraged by the author/publisher of this guide The guide should only be used for coding the Bluetooth Gateway for Volkswagen Bluetooth kit. WARNING: The author/publishers of this guide accept no responsibility for damage that may occur from improper use of the VCDS Software/interface cable use. USB interfaces will not work at all with Windows 95 or NT4. USB interface cable works best with Windows XP or newer on a 1 GHz or faster PC, or on Vista on a machine robust enough to support that that operating system. We recommend at least a 500 MHz Pentium‐3 (or AMD equivalent) with 64MB of RAM and Windows 98 or newer. This guide is intended for use in conjunction with the VCDS VAG‐COM Diagnostic Software and the Ross‐Tech HEX+CAN‐USB Interface cable.
#Vcds program how to#
How to use VCDS software for gateway coding? With No the new coding is written into the Gateway control module. If the selection of coded control modules was changed earlier, then the user is If this test step is answered with yew, then the coding will be written into the control module. (Inquiry before writing the Gateway coding) This inquiry for this information is also constructed the same and displays the brand as shown in the example:Ĭlicking on the information to be coded open the window with the next inquiry.Īfter all the decisions for special coding are made, the user must confirm one more time that the Gateway coding The information read from the Gateway is framed in blue. This information is already in the Gateway control module and can be changed by You will be asked for vehicle brand, vehicle version, the number of door and if the vehicle has If you continue the test program with End/Continue, then additional decisions for special coding must be madeįor some vehicles. (Display of the coded/not coded control modules in the test program) If you confirm the dialog with OK, the selection is shown in a list. OK : Coding with the current selection continues.Ĭancel : the selection is discarded and coding is cancelled. < describes the control modules in the left list. > describes the control modules in the right list. The control modules in the right column are marked as in Gateway as installed. (Selection of control module to be coded)Īll control modules are listed in the left column, which from the data were identified and are still not marked in The test program determines which control module is already coded in Gateway and which additional control If a program for Gateway coding is accessed, the test sequence will have a few special instructions. Vag diagnostic tools are confirmed to do coding without any issue: Odis crack should work but you should have an account for gateway coding. How to use ODIS software for gateway coding? If the kit is installed and the phone screen is available in the MFD+ cluster display then the vehicle does not require coding. The kit will function without the CAN Gateway being coded but there will be no phone screen available in the vehicles MFD+ cluster display.
Some VW/Skoda vehicles require the CAN Gateway in the vehicle to be coded to accept the Bluetooth Gateway kit. Look here: How to do gateway coding to VW or other VAG group vehicles: